SUN RAY Pinpointer - The Best Of The Best, of In-Line Electronic Probe PinPointers
The SunRay X-1 is compatible with the Explorers and the Quattro MP metal detectors. High quality manufacturing results in an extremely sensitive (up to 3" from a coin sized target) The switch box is mounted permanently to the upper shaft by SunRay. Thus, either a new upper shaft must be purchased, or the customer must send his upper shaft in to SunRay for mounting. One must specify whether they swing their detector with right hand or left hand for proper switch box (switch) orientation. This product just simply says "quality".
The SunRay DX-1 is an in-line target probe similar to the X-1, but is designed and manufactured for the Whites DFX and MXT. The unit comes with a switch box, and 1" x 9" probe on a straight 30" custom cable. The switch box clips to the detector shaft (clip included), and the probe also clips to the shaft with two included shaft mount clips. Detection depth on a coin sized target is up to 3".
The SunRay XL-1 is similar to the DX-1 but comptible with the XLT, and other 6.592kHz Whites machines like the QXT, Quantum, Pro-XL, IDX-Pro, ID-Pro, and the Classics series. The XL-1 also has an optional box mount probe clip attachment for the slim-line control boxes.
The SunRay FZ-1 is similar to the Whites in-line probes except that the shaft mounting clips are velcro lined.
The SunRay FE-1 is similar to the Fisher FZ-1 with the same mounting clip arrangement.
The SunRay GI-1 is compatible with the GTI-1500, 2000, and 2500 models from Garrett. Similar to the Whites probes, with the same mounting configuration.
The SunRay YF-1 is compatible with the ACE150 and ACE250 models, and with the flip of a switch is compatible with the GTP 1350, and the GTAX 550, 750, and 1250. It is not compatible with earlier model GTAX machines nor the GTAX 1000.
The SunRay CS-1 is compatible with the Fisher Coin$trike and ID Edge metal detectors. High quality manufacturing results in an extremely sensitive (up to 3" from a coin sized target) The switch box is mounted via clips to the shaft, and the probe is also shaft mounted with clips, next to the arm rest. The switch box allows easy switching from detector to probe, and in this case, from Coin$trike to ID Edge. This product just simply says "quality".